Jinhongaaa111

created new article

4 months ago - Translate

Precautions For The Use Of Injection Mold Polishing Technology | #injection_mold_maker

Precautions For The Use Of Injection Mold Polishing Technology

Injection plastic mold polishing technology is very important for manufacturing plastic molding tools

Precautions For The Use Of Injection Mold Polishing Technology

created new article

5 months ago - Translate

Common Places For Different Types Of Springs | #Springs

Common Places For Different Types Of Springs

The different types of springs are compression springs, extension springs, torsion springs, and constant force springs.

Common Places For Different Types Of Springs

created new article

5 months ago - Translate

Ejector Pin Do Not Touch Some Minefields | #Ejector_Pin

Ejector Pin Do Not Touch Some Minefields

The arrangement of ejector pins should balance the ejector force as much as possible

Ejector Pin Do Not Touch Some Minefields

created new article

6 months ago - Translate

Two Types Of Ejector Pin In Injection Mold | #Ejector_Pin

Two Types Of Ejector Pin In Injection Mold

Typically, these pins extend and retract to force the part out of the cavity and are the cheapest means of ejection

Two Types Of Ejector Pin In Injection Mold

created new article

8 months ago - Translate

Causes Of Defects In Injection Molded Parts | #injection_mold

Causes Of Defects In Injection Molded Parts

Understanding what causes a finished part to not survive the intended environment in which it was designed to operate is critical

Causes Of Defects In Injection Molded Parts

Details
60 posts
Male